The 'fit' FTN-R offers the perfect solution for those outdoor areas where false alarms caused by environmental disturbances and small animals are an issue. The wireless-ready, battery powered version allow installers to save valuable installation time and labor costs because no trenching, installing conduit or pulling wire is required. The FTN-R includes a wireless-ready backbox to hold a third party's battery and wireless transmitter, and it comes with a built in bracket that enables horizontal rotation of 190 degrees. It's compact size and flexible detection area allow the sensor to 'fit' into a variety of both residential and commercial applications.

  • Long life battery (Not Included)
  • Selectable 16.4ft. (5m) and 6.6ft. (2m) narrow detection ranges 
  • 190° horizontal rotation with built in mounting bracket 
  • Dual PIR detectors for enhanced pet tolerance
  • Super Multi Dimension Analysis Logic analyzes every motion before signaling an alarm
  • Double Conductive Shielding
  • Intelligent 'AND' logic 
Passive Infrared
Battery Powered
Product Type: 
Reference Documents: 
Product Specifications: 
Detection MethodPassive Infrared
PIR Coverage 5 x 1m (16'5" x 3'3")
Detection Length Limit2 m, 5 m (6'7", 16'5")
Detectable speed0.3m - 1.5m/s (1' - 4'11"/s)
Sensitivity2.0°C (at 0.6 m/s) (3.6°F (at 2'/s)
Operation Voltage2.5 - 10 V DC
Power Input3 - 9 V DC (Lithium or Alkaline Battery)
Current Draw 9 uA (at standby) / 3mA(max)(at 3 V DC)
Alarm Period2.0 +/-1.0 sec
Warm-up PeriodApprox. 120 sec (LED Blinks)
Alarm outputN.C./N.O. Selectable -Solid State Switch 10 V DC 0.01 A (max)
Trouble outputN.C./N.O. Selectable -Solid State Switch 10 V DC 0.01 A (max)
LED IndicatorEnable: During DIP switch (walk test mode) or DIP switch 4 (LED) on / Disable: During Normal Operation / Light/Blink: warm-up, alarm, masking detection (FTN-RAM only)
Operation Temperature-20 - +60°C (-4 - +140°F)
Environmental Humidity95% (Max)
MountingWall (Indoor/Outdoor)
Mounting Height0.8 -1.2m (2'7" - 3'11")
Weight190 g (6.7 oz)
AccessoriesConnector for power and alarm, connector for trouble, plate nut x 2, screw (M3 x 10MM) x2, screw(3x20mm) x 4, Sponge for transmitter

Additional Product Images

Related Products: