OVS-01GT
For more information:
The OVS Vehicle Presence Sensor Series from OPTEX is designed to reliably detect the presence of a stationary or moving vehicle while also having the ability to ignore most human traffic. It eliminates the hassles associated with the installation of a ground loop, omitting the need for concrete cutting. With 8 adjustable microwave and ultrasonic (for OVS-01GT) detection pattern settings to customize the detection area, 5 sensitivity settings to ignore human movements, and one-touch calibration, the OVS-01GT can reliably detect both small and large vehicles for a multitude of applications.
The OVS-01GT can be mounted and installed quickly without impeding traffic flow, and wires directly to the operator without the need for any additional loop detectors or special programmers. A simple-to-use menu with visual indicators aids in an easy and fast installation process. Once mounted, the OVS-01GT also allows for full adjustment without the need for lifts or ladders.
MODEL | OVS-01GT |
---|---|
Detection Method | Microwave (Doppler shift & FMCW) / Ultrasonic combination |
Frequency | Microwave: 24 GHz, Ultrasonic: 56KHz |
Response Time | 500msec |
Power Supply | 12-24VDC |
Current Consumption | Max 200mA (at 24V DC) with heater ON, Max 80mA (at 24V DC) when heater is OFF |
Output | Relay output DC30V, 0.3A (NO/NC selectable) |
Input | NO/NC input |
Detection Range | Microwave: 7ft to 18ft (2 - 5.5m), Ultrasonic: 2ft to 3ft (0.6 - 1m). Programmable maximum range |
Detection Vehicle Speed | 1mph - 12mph (2 to 20km/h) |
Parameters | Sensitivity: Level 1-5 |
Human Cancel Adjust: Level 1-5 | |
Presence Detection Timer: 5/60/180/infinity min | |
Sensitivity Boost Timer: Off/5/10/20/40 sec | |
Input: Wake L/Wake H/InhibitL/Inhibit H | |
Output: NO/NC | |
Microwave Max Range: 7/8/10/11/13/15/16/18ft (2/2.5/3/2.5/4/4.5/5/5.5m) | |
Ultrasonic Max Range: Off/2/2.5/3ft (Off/0.6/0.8/1m) | |
Sensor Mode: Activation/Vehicle protection | |
Indicator | Normal Operation: Stand-by: solid green, Detection: solid red |
Detection Area Check: Non detection - blinking green | Microwave sensor detected: blinking yellow | Ultrasonic sensor detected: blinking purple | Microwave/Ultrasonic sensor detected: blinking red | |
Calibration: in calibration - fast blinking blue | Ultrasonic calibration error: blinking red and blue | |
Sensor reset: reset completed: blinking yellow for 2 seconds | |
Human Cancellation | Available from level 1 to 5 |
Operation Temperature | -22°F to 122°F (-30°C to 50°C) |
Operation Humidity | 95% max (non-condensing) |
International Protection Code | IP65 |
Installed Condition | Indoor/outdoor |
Installation Height | Installation height of 20in (500mm) |
Horizontal Angle Adjustment | Horizontally: +/-30 deg (5 deg steps) |
Weight | 480g (including accessories) |
Accessories | 4 screws and installation manual |