Building upon features inherited from the VX-402 series, VX Infinity presents infinite possibility with the power of detection designs. VXI-ST demonstrates long & stable performance in typical outdoor environments. The VX Infinity Series is manufactured to excel in its performance whether as a perimeter detection solution, spot / area detection solution, or as an immediate perimeter/boundary solution directly on a structure (walls and rooftops).
Digital Double Layer Detection: Both an upper and a lower detection areas must simultaneously be crossed to generate an alarm. The detections are independently analyzed so that a misleading coincidence of events can be filtered out. This technology virtually eliminates detections of smaller animals in the premises.
SMDA logic (Super Multidimensional Analysis): All VXI models are equipped with a digitally enhanced signal recognition logic called SMDA. SMDA improves immunity against various noise factors such as climate changes and vegetation sways. VXIs expands applicable fields and reliability beyond what VX-402 was capable.
- Dual PIR Detection
- Sensitivity Adjustment Switch
- Walk Test Mode LED
- Double Conductive Shielding
- Area Defining Masking Seals
- Cover Tamper
- Quick install
- Area masking templates
- SMDA Logic (minimizes false and missed alarms)
40ft. x 40ft. Dual Outdoor PIR Spot and Area Detection with Pet Tolerance.
|Detection Method||Passive Infrared|
|PIR Coverage||12.0m (40ft) 90° wide/16 zones|
|PIR Distance Limit||12 - 2.5m (5 levels)|
|Detectable Speed||0.3 - 1.5m/s (1.5ft/s)|
|Sensitivity||2.0°C (3.6°F) at 0.6m/s (2ft/s)|
|Power Input||9.5 - 18V DC|
|Current Draw||20 mA (max) at 12 V DC|
|Alarm Period||2.0 ±1sec|
|Warm-Up Period||Approx. 60sec (LED blinks)|
|Alarm Output||N.C./N.O. Selectable 28 V DC 0.1A (max)|
|Tamper Output||N.C. 28V DC 0.1A (max) open when cover removed|
|LED Indicator||Red: Warm-up, alarm|
|RF Interference||No alarm 10V/m|
|Operating Temperature||-30 - +60°C (-22 - +140°F)|
|Environmental Humidity||95% max|
|Mounting||Wall, pole (outdoor, indoor)|
|Mounting Height||0.8 - 1.2m (2.64ft - 3.94ft)|
|Accessories||Screw (4x20mm) x2, Wiring sponge x3, Masking Seal x3|